The HJ-DYZ-600 intelligent high-frequency switch-mode power system comprises a cabinet, AC distribution, rectifier modules (up to 12 fully configured), a monitoring module, and DC distribution. It offers comprehensive battery management-including low-voltage protection and optional load disconnect-plus temperature compensation, automatic voltage regulation, stepless current limiting, capacity calculation, online battery testing, and sleep energy-saving. Networked design with RS232/RS485 and dry-contact ports enables flexible networking, remote monitoring, and unattended operation, with full AC/DC surge protection and complete fault protection/alarm functions.
Anfon Neges Cael Pris
| Paramedrau Amgylcheddol | Amodau gweithredu | Amodau trafnidiaeth | Amodau storio | Safonau perthnasol | Sylwadau | |||
| Categori | Paramedr | Uned | ||||||
| Amodau hinsoddol | tymheredd | Tymheredd isel | ℃ | 33- | 40- | 40- | Cymalau 4.1.1 a 4.1.2 YD/T 1058-2000 | Dechrau llwyth llawn ar −40℃; gostyngiad llinol 20% o +55 i +65℃. |
| Tymheredd uchel | ℃ | 65 | 70 | 70 | ||||
| Newid tymheredd | ℃/munud | / | 1 | / | ETS 300 019-2-2 T2.3 | |||
| Gweithredu tymheredd amgylchynol | ℃ | -33-65 | Tymheredd gweithredu eithafol llwyth llawn | |||||
| tymheredd storio | ℃ | -40-70 | ||||||
| Lleithder | Lleithder cymharol | % | 5-90 | 90 (40±2℃) | / | Cymal 4.1.3 YD/T 1058-2000 | Short-term test: 0-95%, max 95%, non-condensing | |
| Anwedd | Ydw / Nac ydw | Na | Na | Ydy | ||||
| Pwysedd atmosfferig | Pwysedd isel | kPa | 86 | 70 | 70 | Cymal 4.1.4 YD/T 1058-2000 | Profi modiwlau yn unig | |
| Pwysedd uchel | kPa | 106 | 106 | 106 | ||||
| Uchder | m | ≤ 4000 | Uwchlaw 2000 m, gostyngir 0.5℃ fesul 100 m ychwanegol | |||||
Nodyn: Gall manylebau newid heb rybudd ymlaen llaw er mwyn gwella cynnyrch. Taflen Ddata
Fully digital interleaved PFC innovative control with limited bipolar ZVS full-bridge topology, current-doubler rectifier topology, and dual MCUs for fully digital monitoring
Rectifiers use PFC so AC input current matches the voltage waveform and phase; high system efficiency saves energy and reduces OPEX
High-frequency PWM conversion reduces switching losses and EMI, allowing installation inside switching equipment rooms
Intelligent battery management with continuously settable equalization/float voltages and charge current limits via controller or remote system; supports float, equalization, and battery testing
Equipotential design across the cabinet improves EMC and lightning protection
Mae'n addas ar gyfer amrywiol senarios defnydd pŵer megis adeiladau preswyl ac adeiladau swyddfa masnachol
Rydym wedi ymrwymo i ddarparu cefnogaeth brydlon, broffesiynol i sicrhau bod eich anghenion ynni bob amser yn cael eu diwallu gyda'r lefel uchaf o wasanaeth.
Rydyn ni yma i ateb eich cwestiynau a darparu'r atebion ynni sy'n gweddu orau i'ch anghenion.